Product Introduction
Bambu Lab A1 3D Printer
Excluding AMS Lite
Multi-color Printing (Supported with AMS Lite)
The new AMS Lite system is elegant and reliable, making multi-color 3D printing easier for everyone to experience.
A1 Combo (including AMS Lite) is also available.
Active Flow Compensation
A1 revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure inside the nozzle. Our algorithm actively adjusts the flow rate based on the readings for precise extrusion.
Fully automatic calibration
The A1 can handle a wide range of calibrations automatically. It precisely calibrates Z offset, bed height, vibration resonance, and nozzle pressure for every print.
One-click quick change nozzle
The new one-click quick change hot end design allows the nozzle to be easily popped in or out with just a light press.
Active Motor Noise CancellationA1
calibrates parameters based on minute differences between each drive motor to cancel out unwanted motor noise for quieter operation.
The slider is equipped with CoreXY speed and quality
all-metal guides, a solid frame, nozzle pressure sensors, accelerometers, a powerful MCU, and most importantly, an advanced motion control system that utilizes these features to print a 14-minute 3D printed test boat with high quality and in compliance with all speed standards without using specialized materials.
Built-in camera & lens cover
With the built-in camera, you can also record time-lapse videos, and attach a camera lens cover to provide the most private protection
256x256x256 mm³ printing area The
spacious printing area meets the printing needs of larger and more complex works and provides a wider range of application space
MakerWorld APP is at your fingertips. You can use Bambu Studio and Bambu Handy App to print or manage your printer with one click
anytime, anywhere
3D printed finished product
Mobile phone accessories set - protective frame/filter ring/grip 【5 HR】
Model created by @Zemister/@plucbernier/@FF3D
three-axis tourbillon 【1.5 DAY】
Mystery Box Model by mcmaven
RC Christmas Snow Cat Car 【1 DAY】
Model created by Bambu Lab
Good Vibes Only Light Box 【4.5 HR】
Model created by @braga3dprint
Package Contents
A1 3D Printer AMS Lite Top Bracket AMS Lite Printing Platform PTFE Tube*1 Bambu Filament Sample (Random Color) Stainless Steel Nozzle (Pre-installed) Accessory Box 
Assembly Instructions
Product Specifications
| Body size (length x width x height) | 385*410*430 mm | |
| technology | Fused Deposition Modeling | |
| Print size (length x width x height) | 256*256*256 mm | |
| Hot End | Full Metal | |
| Extruder teeth | steel | |
| nozzle | Stainless steel | |
| Hot end maximum temperature | 300℃ | |
| Nozzle diameter (default) | 0.4mm | |
| Nozzle diameter (optional) | 0.2mm, 0.6mm, 0.8mm | |
| Tool head cutter | built-in | |
| Wire diameter | 1.75 mm | |
| Compatible printing platforms | Bambu double-sided textured PEI printing platform, high temperature printing platform (PEI) | |
| Printing platform maximum temperature | 100℃ | |
| Tool head maximum speed | 500 mm/s | |
| Tool head maximum acceleration | 10 m/s 2 | |
| PLA,PETG,TPU, PVA | ideal | |
| ABS, ASA, PC, PA, PET, Carbon/ Glass Fiber Reinforced Polymer | Not recommended | |
| Surveillance Cameras | Low-speed camera (up to 1080P) supports time-lapse photography | |
| Material break detection | support | |
| Fineness measurement | support | |
| Power off and resume printing | support | |
| Wire Wrap Sensor | support | |
| Packing size | 546*532*320 mm | |
| net weight | 8.3 kg | |
| Packing weight | 13 kg | |
| Voltage | 100-240 VAC, 50/60 Hz | |
| Maximum Power | 1300W@220V, 350W@110V | |
| Display screen | 3.5 inches 320*240 IPS touch screen | |
| connect | Wi-Fi, Bambu-Bus | |
| capacity | Micro SD Card | |
| User Interface | Touch screen, mobile APP, computer application | |
| Motion Controllers | Dual-core Cortex-M4 processor | |
| Slicing software | Other third-party slicers that can export standard G-code are supported, such as Superslicer, Prusaslicer, and Cura, but some smart features may not be supported. | |
| Slicing software can support operating systems | MacOS, Windows | |
| Wi-Fi frequency range | 2412 MHz - 2472 MHz (CE) 2412 MHz - 2462 MHz (FCC) 2400 MHz - 2483.5 MHz (SRRC) |
|
| Transmitter power (EIRP) | ≤ 21.5 dBm (FCC) ≤ 20 dBm (CE/SRRC) |
|
| program | IEEE 802.11 b/g/n | |
| Product Contents | Bambu Lab A1 3D Printer Filament Shaft Holder Cleaning Wiper Bambu Textured PEI Panel PTFE Tube x5 20g Bambu Filament x1 (Color/Type Random) Accessory Box |
|
Product Introduction
Product Specifications
Bambu Lab A1 3D Printer
Excluding AMS Lite
Multi-color Printing (Supported with AMS Lite)
The new AMS Lite system is elegant and reliable, making multi-color 3D printing easier for everyone to experience.
A1 Combo (including AMS Lite) is also available.
Active Flow Compensation
A1 revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure inside the nozzle. Our algorithm actively adjusts the flow rate based on the readings for precise extrusion.
Fully automatic calibration
The A1 can handle a wide range of calibrations automatically. It precisely calibrates Z offset, bed height, vibration resonance, and nozzle pressure for every print.
One-click quick change nozzle
The new one-click quick change hot end design allows the nozzle to be easily popped in or out with just a light press.
Active Motor Noise CancellationA1
calibrates parameters based on minute differences between each drive motor to cancel out unwanted motor noise for quieter operation.
The slider is equipped with CoreXY speed and quality
all-metal guides, a solid frame, nozzle pressure sensors, accelerometers, a powerful MCU, and most importantly, an advanced motion control system that utilizes these features to print a 14-minute 3D printed test boat with high quality and in compliance with all speed standards without using specialized materials.
Built-in camera & lens cover
With the built-in camera, you can also record time-lapse videos, and attach a camera lens cover to provide the most private protection
256x256x256 mm³ printing area The
spacious printing area meets the printing needs of larger and more complex works and provides a wider range of application space
MakerWorld APP is at your fingertips. You can use Bambu Studio and Bambu Handy App to print or manage your printer with one click
anytime, anywhere
3D printed finished product
Mobile phone accessories set - protective frame/filter ring/grip 【5 HR】
Model created by @Zemister/@plucbernier/@FF3D
three-axis tourbillon 【1.5 DAY】
Mystery Box Model by mcmaven
RC Christmas Snow Cat Car 【1 DAY】
Model created by Bambu Lab
Good Vibes Only Light Box 【4.5 HR】
Model created by @braga3dprint
Package Contents
A1 3D Printer AMS Lite Top Bracket AMS Lite Printing Platform PTFE Tube*1 Bambu Filament Sample (Random Color) Stainless Steel Nozzle (Pre-installed) Accessory Box
Assembly Instructions
| Body size (length x width x height) | 385*410*430 mm | |
| technology | Fused Deposition Modeling | |
| Print size (length x width x height) | 256*256*256 mm | |
| Hot End | Full Metal | |
| Extruder teeth | steel | |
| nozzle | Stainless steel | |
| Hot end maximum temperature | 300℃ | |
| Nozzle diameter (default) | 0.4mm | |
| Nozzle diameter (optional) | 0.2mm, 0.6mm, 0.8mm | |
| Tool head cutter | built-in | |
| Wire diameter | 1.75 mm | |
| Compatible printing platforms | Bambu double-sided textured PEI printing platform, high temperature printing platform (PEI) | |
| Printing platform maximum temperature | 100℃ | |
| Tool head maximum speed | 500 mm/s | |
| Tool head maximum acceleration | 10 m/s 2 | |
| PLA,PETG,TPU, PVA | ideal | |
| ABS, ASA, PC, PA, PET, Carbon/ Glass Fiber Reinforced Polymer | Not recommended | |
| Surveillance Cameras | Low-speed camera (up to 1080P) supports time-lapse photography | |
| Material break detection | support | |
| Fineness measurement | support | |
| Power off and resume printing | support | |
| Wire Wrap Sensor | support | |
| Packing size | 546*532*320 mm | |
| net weight | 8.3 kg | |
| Packing weight | 13 kg | |
| Voltage | 100-240 VAC, 50/60 Hz | |
| Maximum Power | 1300W@220V, 350W@110V | |
| Display screen | 3.5 inches 320*240 IPS touch screen | |
| connect | Wi-Fi, Bambu-Bus | |
| capacity | Micro SD Card | |
| User Interface | Touch screen, mobile APP, computer application | |
| Motion Controllers | Dual-core Cortex-M4 processor | |
| Slicing software | Other third-party slicers that can export standard G-code are supported, such as Superslicer, Prusaslicer, and Cura, but some smart features may not be supported. | |
| Slicing software can support operating systems | MacOS, Windows | |
| Wi-Fi frequency range | 2412 MHz - 2472 MHz (CE) 2412 MHz - 2462 MHz (FCC) 2400 MHz - 2483.5 MHz (SRRC) |
|
| Transmitter power (EIRP) | ≤ 21.5 dBm (FCC) ≤ 20 dBm (CE/SRRC) |
|
| program | IEEE 802.11 b/g/n | |
| Product Contents | Bambu Lab A1 3D Printer Filament Shaft Holder Cleaning Wiper Bambu Textured PEI Panel PTFE Tube x5 20g Bambu Filament x1 (Color/Type Random) Accessory Box |
|
