.jpeg?w=466&h=350)
Product Features
- Full-auto Calibration.
- 4-Color Printing with AMS lite.
- Under 48 dB Low Noise in Silent Mode.
- Full-metal Linear Rails and Bearings.
- Vibration and Flow Rate Compensation.
- English
- 中文（繁體）
- 美國（USD $）
Product Introduction
Overall Features
• Fully automatic calibration
•Four-color printing with AMS lite
•Noise level below 48 dB in silent mode
•All-metal linear guides and bearings
•Vibration and flow rate compensation
Easy-to-use multi-color printing
The new automatic feeding system AMS lite is compact and reliable. When paired with A1 mini, it allows everyone to easily master multi-color 3D printing.
Active flow compensation
The A1 mini revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. The algorithm actively compensates the flow rate based on the readings, thereby achieving precise extrusion and making every corner smooth and silky!
Fully automatic calibration
The A1 mini can handle all kinds of calibration on its own. It automatically and carefully calibrates Z offset, bed level, vibration resonance and nozzle pressure for each print job. No more tedious manual calibration and adjustments!
Plug and Play
The A1 mini comes pre-assembled, precisely pre-aligned and pre-leveled at the factory. Once you get it, it takes only 20 minutes to be ready for your first print, with no manual adjustments required. Getting started has never been easier!
Motor active noise reduction technology
The A1 mini can calibrate parameters to match the slight individual differences between each drive motor. This compensates for unwanted motor noise. Active noise reduction and silent mode can reduce the printer's operating noise level to less than 48 dB, so you don't have to worry about being disturbed when taking a nap while working on the printer !
High speed and precision
The A1 mini is equipped with a full metal rail and frame, nozzle pressure sensor, accelerometer and a powerful MCU. Under the precise control of the advanced motion control system, the A1 mini can play a perfect 14-minute boat without the use of special PLA.
Synchronizes with Bambu Studio and Bambu Handy
Remotely control and monitor printers via Bambu Studio or Bambu Handy. With the built-in camera, you can also record time-lapse videos.
Product Specifications
| body | A1 Mini | |
| technology | Fused Deposition Modeling | |
| Print size (length x width x height) | 180 x 180 x 180 mm | |
| Hot End | Full Metal | |
| Extruder teeth | steel | |
| nozzle | Stainless steel | |
| Hot end maximum temperature | 300℃ | |
| Nozzle diameter (default) | 0.4mm | |
| Nozzle diameter (optional) | 0.2mm, 0.6mm, 0.8mm | |
| Tool head cutter | built-in | |
| Wire diameter | 1.75 mm | |
| Compatible Print Plate Surfaces | Bambu Textured PEI Panel, Bambu Smooth PEI Panel | |
| Maximum temperature of printed circuit board | 80℃ | |
| Tool head maximum speed | 500 mm/s | |
| Tool head maximum acceleration | 10 m/s 2 | |
| Maximum hot end flow | 28 mm/s @ABS (Model: 150 × 150 mm single wall material: Bambu ABS; Temperature: 280°C) | |
| Component cooling fans | Closed-loop control | |
| Hot end fan | Closed-loop control | |
| MC board cooling fan | Closed-loop control | |
| PLA,PETG,TPU, PVA | ideal | |
| ABS, ASA, PC, PA, PET, Carbon/ Glass Fiber Reinforced Polymer | Not recommended | |
| Surveillance Cameras | Low-speed camera (up to 1080P) supports time-lapse photography | |
| Material breakage detection | support | |
| Fineness measurement | support | |
| Power off and resume printing | support | |
| Wire Wrap Sensor | support | |
| Dimensions | 347 x 315 x 365 mm | |
| net weight | 5.5 kg | |
| Voltage | 100-240VAC, 50/60Hz | |
| Maximum Power | 150W | |
| Display screen | 2.4 inches 320 x 240 IPS touch screen | |
| connect | Wi-Fi, Bambu-Bus | |
| capacity | Micro SD Card | |
| User Interface | Touch screen, mobile APP, computer application | |
| Motion Controllers | Dual-core Cortex-M4 processor | |
| Slicing software | Other third-party slicers that can export standard G-code are supported, such as Superslicer, Prusaslicer, and Cura, but some smart features may not be supported. | |
| Slicing software can support operating systems | MacOS, Windows | |
| Wi-Fi frequency range | 2412 MHz - 2472 MHz (CE) 2412 MHz - 2462 MHz (FCC) 2400 MHz - 2483.5 MHz (SRRC) |
|
| Transmitter power (EIRP) | ≤ 21.5 dBm (FCC) ≤ 20 dBm (CE/ SRRC) |
|
| program | IEEE 802.11 b/g/n | |
| Product Contents | Bambu Lab A1 Mini 3D Printer Bambu Lab AMS Lite body (without filament, for display only) Bambu AMS Lite stand AMS Lite rotating spool stand x5 cleaning wiper Bambu textured PEI panel PTEF tube x5 accessory box 20g Bambu filament x1 (color/type random) |
|
Product Introduction
Product Specifications
Overall Features
• Fully automatic calibration
•Four-color printing with AMS lite
•Noise level below 48 dB in silent mode
•All-metal linear guides and bearings
•Vibration and flow rate compensation
Easy-to-use multi-color printing
The new automatic feeding system AMS lite is compact and reliable. When paired with A1 mini, it allows everyone to easily master multi-color 3D printing.
Active flow compensation
The A1 mini revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. The algorithm actively compensates the flow rate based on the readings, thereby achieving precise extrusion and making every corner smooth and silky!
Fully automatic calibration
The A1 mini can handle all kinds of calibration on its own. It automatically and carefully calibrates Z offset, bed level, vibration resonance and nozzle pressure for each print job. No more tedious manual calibration and adjustments!
Plug and Play
The A1 mini comes pre-assembled, precisely pre-aligned and pre-leveled at the factory. Once you get it, it takes only 20 minutes to be ready for your first print, with no manual adjustments required. Getting started has never been easier!
Motor active noise reduction technology
The A1 mini can calibrate parameters to match the slight individual differences between each drive motor. This compensates for unwanted motor noise. Active noise reduction and silent mode can reduce the printer's operating noise level to less than 48 dB, so you don't have to worry about being disturbed when taking a nap while working on the printer !
High speed and precision
The A1 mini is equipped with a full metal rail and frame, nozzle pressure sensor, accelerometer and a powerful MCU. Under the precise control of the advanced motion control system, the A1 mini can play a perfect 14-minute boat without the use of special PLA.
Synchronizes with Bambu Studio and Bambu Handy
Remotely control and monitor printers via Bambu Studio or Bambu Handy. With the built-in camera, you can also record time-lapse videos.
| body | A1 Mini | |
| technology | Fused Deposition Modeling | |
| Print size (length x width x height) | 180 x 180 x 180 mm | |
| Hot End | Full Metal | |
| Extruder teeth | steel | |
| nozzle | Stainless steel | |
| Hot end maximum temperature | 300℃ | |
| Nozzle diameter (default) | 0.4mm | |
| Nozzle diameter (optional) | 0.2mm, 0.6mm, 0.8mm | |
| Tool head cutter | built-in | |
| Wire diameter | 1.75 mm | |
| Compatible Print Plate Surfaces | Bambu Textured PEI Panel, Bambu Smooth PEI Panel | |
| Maximum temperature of printed circuit board | 80℃ | |
| Tool head maximum speed | 500 mm/s | |
| Tool head maximum acceleration | 10 m/s 2 | |
| Maximum hot end flow | 28 mm/s @ABS (Model: 150 × 150 mm single wall material: Bambu ABS; Temperature: 280°C) | |
| Component cooling fans | Closed-loop control | |
| Hot end fan | Closed-loop control | |
| MC board cooling fan | Closed-loop control | |
| PLA,PETG,TPU, PVA | ideal | |
| ABS, ASA, PC, PA, PET, Carbon/ Glass Fiber Reinforced Polymer | Not recommended | |
| Surveillance Cameras | Low-speed camera (up to 1080P) supports time-lapse photography | |
| Material breakage detection | support | |
| Fineness measurement | support | |
| Power off and resume printing | support | |
| Wire Wrap Sensor | support | |
| Dimensions | 347 x 315 x 365 mm | |
| net weight | 5.5 kg | |
| Voltage | 100-240VAC, 50/60Hz | |
| Maximum Power | 150W | |
| Display screen | 2.4 inches 320 x 240 IPS touch screen | |
| connect | Wi-Fi, Bambu-Bus | |
| capacity | Micro SD Card | |
| User Interface | Touch screen, mobile APP, computer application | |
| Motion Controllers | Dual-core Cortex-M4 processor | |
| Slicing software | Other third-party slicers that can export standard G-code are supported, such as Superslicer, Prusaslicer, and Cura, but some smart features may not be supported. | |
| Slicing software can support operating systems | MacOS, Windows | |
| Wi-Fi frequency range | 2412 MHz - 2472 MHz (CE) 2412 MHz - 2462 MHz (FCC) 2400 MHz - 2483.5 MHz (SRRC) |
|
| Transmitter power (EIRP) | ≤ 21.5 dBm (FCC) ≤ 20 dBm (CE/ SRRC) |
|
| program | IEEE 802.11 b/g/n | |
| Product Contents | Bambu Lab A1 Mini 3D Printer Bambu Lab AMS Lite body (without filament, for display only) Bambu AMS Lite stand AMS Lite rotating spool stand x5 cleaning wiper Bambu textured PEI panel PTEF tube x5 accessory box 20g Bambu filament x1 (color/type random) |
|