Product Introduction
Bambu Lab PA6-CF Black
Bambu PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. Carbon fiber reinforcements provide significantly higher stiffness and strength properties in dry environments while maintaining excellent heat and impact resistance. Similar to other Bambu CF filaments, these excellent mechanical properties make it ideal for printing jigs, fixtures, automotive and mechanical components, and a variety of structural and engineering parts used in dry environments.
As a new member of Bambu's high-performance filaments, PA6-CF can still maintain excellent stiffness and strength properties in a dry environment, making it very suitable for printing load-bearing structural parts.
| Normal PA-CF | PA6-CF | improve% | |
| Strength (flexural strength-XY, dry state) | 128MPa | 151MPa | 18% |
| Stiffness (Flexural Modulus - XY, Dry) | 4420MPa | 5460MPa | twenty four% |
Bambu PA6-CF has excellent impact resistance, ensuring your prints are effectively protected against vibrations. It is often used to print models that need to withstand shock, impact, and vibration.
* If PA6-CF is placed in a humid environment for more than one day, the printed part will become hard.
| Wire | PLA Basic | PETG Basic | ABS | ASA | PC | PA6-CF | PAHT-CF | PET-CF |
| Heat deformation temperature/℃(0.45MPa) | 57℃ | 69℃ | 87℃ | 100℃ | 117℃ | 186℃ | 194℃ | 205℃ |
Learn more about the different cables in the Bambu Cable Guide >>
| Ordinary PA6-CF | PA6-CF | PAHT-CF | |
| work | Nylon 6, carbon fiber | Nylon 6, carbon fiber | PA12 and other long-chain PA, carbon fiber |
| AMS Compatibility | incompatible | incompatible | Compatible |
| Dry before use | Required | Required | Required |
| Printing speed | < 100 mm/s | < 100 mm/s | < 100 mm/s |
| Printer Type | shell | shell | shell |
| Toughness (Impact Strength - XY, Dry State) | 35.7 kJ/m² | 40.3 kJ/m² | 57.5 kJ/m² |
| Toughness (Impact Strength - XY, Wet) | 65.4 kJ/m² | 57.2 kJ/m² | 62.3 kJ/m² |
| Strength (flexural strength-XY, dry state) | 141MPa | 151MPa | 125MPa |
| Strength (Flexural Strength-XY, Wet) | 67MPa | 95MPa | 115MPa |
| Layer strength (flexural strength - Z, dry state) | 72MPa | 80MPa | 61MPa |
| Layer Strength (Flexural Strength - Z, Wet) | 31MPa | 45MPa | 49MPa |
| Stiffness (Flexural Modulus - XY, Dry) | 4870MPa | 5460MPa | 4230MPa |
| Stiffness (Flexural Modulus - XY, Wet) | 1890MPa | 3560MPa | 3640MPa |
| Layer Adhesion (Impact Strength - Z, Dry State) | 11.6 kJ/m² | 15.5 kJ/m² | 13.3 kJ/m² |
| Heat resistance (HDT, 0.45MPa) | 177℃ | 186℃ | 194℃ |
| Saturated water absorption/% (25℃, 55%RH) | 3.80 | 2.35 | 0.88 |
Wire & Spool*1 & Desiccant*1
Wire label*1
Outer box*1
Product Specifications
| diameter | 1.75 mm |
| Wire net weight | 500 g |
| Spool Material | PC+ABS (heat resistant 90°C ) |
| Spool size | Diameter : 200 mm; Height: 67 mm |
| Drying setting before printing | 80 ̊C, 8-12 hours X1 series printer hot bed: 90 - 100 °C, 12 h |
| Printing and storing humidity | < 20% RH (sealed with desiccant) |
| Nozzle temperature | 260 - 290 °C |
| Print plate type | Engineering printed board, high temperature board or textured PEI board |
| Print board preparation | 80 - 100 °C |
| Cooling fan | 0-60 % |
| Printing speed | < 100 mm /s |
| Retracted length | 0.8 - 1.4 mm |
| Retraction speed | 20 - 40 mm /s |
| Temperature inside the machine | 45 - 60 °C |
| Maximum overhang angle | ~70 ̊C |
| Maximum bridge length | ~40 mm |
| Support Materials | Support PA/PET |
| density | 1.09 g/ cm³ |
| Vicat softening temperature | 223 ̊C |
| Heat Deflection Temperature | 186 ̊C |
| Melting temperature | 223 ̊C |
| Melt index | 6.8 ± 0.6 g/10 min |
| Tensile Strength | 102 ± 7 MPa |
| Elongation at break | 5.8 ± 1.6% |
| Flexural modulus | 5460 ± 280 MPa |
| Bending Strength | 151 ± 8 MPa |
| Impact strength | 40.3 ± 2.5 kJ/ m² |
Product Introduction
Product Specifications
Bambu Lab PA6-CF Black
Bambu PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. Carbon fiber reinforcements provide significantly higher stiffness and strength properties in dry environments while maintaining excellent heat and impact resistance. Similar to other Bambu CF filaments, these excellent mechanical properties make it ideal for printing jigs, fixtures, automotive and mechanical components, and a variety of structural and engineering parts used in dry environments.
As a new member of Bambu's high-performance filaments, PA6-CF can still maintain excellent stiffness and strength properties in a dry environment, making it very suitable for printing load-bearing structural parts.
| Normal PA-CF | PA6-CF | improve% | |
| Strength (flexural strength-XY, dry state) | 128MPa | 151MPa | 18% |
| Stiffness (Flexural Modulus - XY, Dry) | 4420MPa | 5460MPa | twenty four% |
Bambu PA6-CF has excellent impact resistance, ensuring your prints are effectively protected against vibrations. It is often used to print models that need to withstand shock, impact, and vibration.
* If PA6-CF is placed in a humid environment for more than one day, the printed part will become hard.
| Wire | PLA Basic | PETG Basic | ABS | ASA | PC | PA6-CF | PAHT-CF | PET-CF |
| Heat deformation temperature/℃(0.45MPa) | 57℃ | 69℃ | 87℃ | 100℃ | 117℃ | 186℃ | 194℃ | 205℃ |
Learn more about the different cables in the Bambu Cable Guide >>
| Ordinary PA6-CF | PA6-CF | PAHT-CF | |
| work | Nylon 6, carbon fiber | Nylon 6, carbon fiber | PA12 and other long-chain PA, carbon fiber |
| AMS Compatibility | incompatible | incompatible | Compatible |
| Dry before use | Required | Required | Required |
| Printing speed | < 100 mm/s | < 100 mm/s | < 100 mm/s |
| Printer Type | shell | shell | shell |
| Toughness (Impact Strength - XY, Dry State) | 35.7 kJ/m² | 40.3 kJ/m² | 57.5 kJ/m² |
| Toughness (Impact Strength - XY, Wet) | 65.4 kJ/m² | 57.2 kJ/m² | 62.3 kJ/m² |
| Strength (flexural strength-XY, dry state) | 141MPa | 151MPa | 125MPa |
| Strength (Flexural Strength-XY, Wet) | 67MPa | 95MPa | 115MPa |
| Layer strength (flexural strength - Z, dry state) | 72MPa | 80MPa | 61MPa |
| Layer Strength (Flexural Strength - Z, Wet) | 31MPa | 45MPa | 49MPa |
| Stiffness (Flexural Modulus - XY, Dry) | 4870MPa | 5460MPa | 4230MPa |
| Stiffness (Flexural Modulus - XY, Wet) | 1890MPa | 3560MPa | 3640MPa |
| Layer Adhesion (Impact Strength - Z, Dry State) | 11.6 kJ/m² | 15.5 kJ/m² | 13.3 kJ/m² |
| Heat resistance (HDT, 0.45MPa) | 177℃ | 186℃ | 194℃ |
| Saturated water absorption/% (25℃, 55%RH) | 3.80 | 2.35 | 0.88 |
Wire & Spool*1 & Desiccant*1
Wire label*1
Outer box*1
| diameter | 1.75 mm |
| Wire net weight | 500 g |
| Spool Material | PC+ABS (heat resistant 90°C ) |
| Spool size | Diameter : 200 mm; Height: 67 mm |
| Drying setting before printing | 80 ̊C, 8-12 hours X1 series printer hot bed: 90 - 100 °C, 12 h |
| Printing and storing humidity | < 20% RH (sealed with desiccant) |
| Nozzle temperature | 260 - 290 °C |
| Print plate type | Engineering printed board, high temperature board or textured PEI board |
| Print board preparation | 80 - 100 °C |
| Cooling fan | 0-60 % |
| Printing speed | < 100 mm /s |
| Retracted length | 0.8 - 1.4 mm |
| Retraction speed | 20 - 40 mm /s |
| Temperature inside the machine | 45 - 60 °C |
| Maximum overhang angle | ~70 ̊C |
| Maximum bridge length | ~40 mm |
| Support Materials | Support PA/PET |
| density | 1.09 g/ cm³ |
| Vicat softening temperature | 223 ̊C |
| Heat Deflection Temperature | 186 ̊C |
| Melting temperature | 223 ̊C |
| Melt index | 6.8 ± 0.6 g/10 min |
| Tensile Strength | 102 ± 7 MPa |
| Elongation at break | 5.8 ± 1.6% |
| Flexural modulus | 5460 ± 280 MPa |
| Bending Strength | 151 ± 8 MPa |
| Impact strength | 40.3 ± 2.5 kJ/ m² |
-9.jpeg?w=466&h=350)
-11.jpeg?w=466&h=350)
-7.jpeg?w=466&h=350)
-3.jpeg?w=466&h=350)