-11.jpeg?w=466&h=350)
-13.jpeg?w=466&h=350)
-9.jpeg?w=466&h=350)
-5.jpeg?w=466&h=350)
• Strong and durable
• Good heat and cold resistance
• Comes with high temperature reusable reel
• Diameter: 1.75mm +/- 0.03mm
- English
- 中文（繁體）
- United States（USD $）
Product Introduction
Features
• Strong and durable
• Good heat and cold resistance
• Comes with high temperature reusable reel
• Diameter: 1.75mm +/- 0.03mm
| Recommended | Not Recommended | |
| Build Plate | Engineering Plate, High Temperature Plate or Textured PEI Plate | Cool Plate |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
Smart Printing • RFID Technology
All printing parameters are embedded in the RFID, which can be read by our AMS (Automatic Material System).
Just load and print! No more cumbersome setup steps.
• A pungent and unpleasant odor may be released during the printing process. Please ensure that your printer is placed in a well-ventilated area.
• Drying conditions: 80℃, 8 hours. Please store in a dry environment after use. If the material is hygroscopic, dry it before use. For more details see: Wire Drying Instructions on the WIKI .
• ABS is prone to warping when printing large size and/or high fill density models. To avoid warping:
1. It is not recommended to print models that are too large and/or have high filling density.
2. Use a closed printer and make sure the build plate is properly glued before printing.
3. Set a lower print speed and a higher hot bed temperature. For more details, see: Common print quality problems and solutions on the WIKI .
Cable*1 & Desiccant*1
Instruction manual*1
& spool sticker*1
Outer packaging*1
Wire label*1
The Bambu Lab 3D printer comes with a scroll model. Print spools from built-in files
Product Specifications
| diameter | 1.75 mm |
| Wire net weight | 1000 g |
| Spool Material | PC+ABS (temperature resistance 90°C) |
| Spool size | Diameter: 200 mm; Height: 67 mm |
| Drying setting before printing | 80 ̊C, 8 hours |
| Printing and storing humidity | < 20% RH (sealed with desiccant) |
| Nozzle temperature | 240-270 °C |
| Print plate type | Low temperature plate, high temperature printing platform or textured PEI platform |
| Hot bed temperature | 30-35 °C |
| Cooling fan | 100 % |
| Printing speed | < 200 mm/s |
| Retracted length | 0.8 - 1.4 mm |
| Retraction speed | 20 - 40 mm/s |
| Temperature inside the machine | 25 - 45 °C |
| Maximum overhang angle | 70 ̊ |
| Maximum bridge length | 20 mm |
| density | 1.05 g/ cm³ |
| Vicat softening temperature | 94 ̊C |
| Heat Deflection Temperature | ISO 75 1.8 MPa: 84 °C / ISO 75 0.45 MPa: 87 °C |
| Melting temperature | 200 ̊C |
| Melt index | 34.2 ± 3.8 g / 10 min |
Product Introduction
Product Specifications
Features
• Strong and durable
• Good heat and cold resistance
• Comes with high temperature reusable reel
• Diameter: 1.75mm +/- 0.03mm
| Recommended | Not Recommended | |
| Build Plate | Engineering Plate, High Temperature Plate or Textured PEI Plate | Cool Plate |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
Smart Printing • RFID Technology
All printing parameters are embedded in the RFID, which can be read by our AMS (Automatic Material System).
Just load and print! No more cumbersome setup steps.
• A pungent and unpleasant odor may be released during the printing process. Please ensure that your printer is placed in a well-ventilated area.
• Drying conditions: 80℃, 8 hours. Please store in a dry environment after use. If the material is hygroscopic, dry it before use. For more details see: Wire Drying Instructions on the WIKI .
• ABS is prone to warping when printing large size and/or high fill density models. To avoid warping:
1. It is not recommended to print models that are too large and/or have high filling density.
2. Use a closed printer and make sure the build plate is properly glued before printing.
3. Set a lower print speed and a higher hot bed temperature. For more details, see: Common print quality problems and solutions on the WIKI .
Cable*1 & Desiccant*1
Instruction manual*1
& spool sticker*1
Outer packaging*1
Wire label*1
The Bambu Lab 3D printer comes with a scroll model. Print spools from built-in files
| diameter | 1.75 mm |
| Wire net weight | 1000 g |
| Spool Material | PC+ABS (temperature resistance 90°C) |
| Spool size | Diameter: 200 mm; Height: 67 mm |
| Drying setting before printing | 80 ̊C, 8 hours |
| Printing and storing humidity | < 20% RH (sealed with desiccant) |
| Nozzle temperature | 240-270 °C |
| Print plate type | Low temperature plate, high temperature printing platform or textured PEI platform |
| Hot bed temperature | 30-35 °C |
| Cooling fan | 100 % |
| Printing speed | < 200 mm/s |
| Retracted length | 0.8 - 1.4 mm |
| Retraction speed | 20 - 40 mm/s |
| Temperature inside the machine | 25 - 45 °C |
| Maximum overhang angle | 70 ̊ |
| Maximum bridge length | 20 mm |
| density | 1.05 g/ cm³ |
| Vicat softening temperature | 94 ̊C |
| Heat Deflection Temperature | ISO 75 1.8 MPa: 84 °C / ISO 75 0.45 MPa: 87 °C |
| Melting temperature | 200 ̊C |
| Melt index | 34.2 ± 3.8 g / 10 min |